This also includes some test baseline updates, due to recent QUIC
changes.
* origin/master: (39 commits)
Update doc submodule [nomail] [skip ci]
Bump cluster testsuite to pull in resilience to agent connection timing [skip ci]
IPv6 support for detect-external-names and testcase
Add `skip_resp_host_port_pairs` option.
util/init_random_seed: write_file implies deterministic
external/subdir-btest.cfg: Set OPENSSL_ENABLE_SHA1_SIGNATURES=1
btest/x509_verify: Drop OpenSSL 1.0 hack
testing/btest: Use OPENSSL_ENABLE_SHA1_SIGNATURES
Add ZAM baseline for new scripts.base.protocols.quic.analyzer-confirmations btest
QUIC/decrypt_crypto: Rename all_data to data
QUIC: Confirm before forwarding data to SSL
QUIC: Parse all QUIC packets in a UDP datagram
QUIC: Only slurp till packet end, not till &eod
Remove unused SupervisedNode::InitCluster declaration
Update doc submodule [nomail] [skip ci]
Bump cluster testsuite to pull in updated Prometheus tests
Make enc_part value from kerberos response available to scripts
Management framework: move up addition of agent IPs into deployable cluster configs
Support multiple instances per host addr in auto metrics generation
When auto-generating metrics ports for worker nodes, get them more uniform across instances.
...
This introduces ian options, DPD::track_removed_services_in_connection.
It adds failed services to the services column, prefixed with a
"-".
Alternatively, this commit also adds
policy/protocols/conn/failed-services.zeek, which provides the same
information in a new column in conn.log.
This commit revamps the handling of analyzer violations that happen
before an analyzer confirms the protocol.
The current state is that an analyzer is disabled after 5 violations, if
it has not been confirmed. If it has been confirmed, it is disabled
after a single violation.
The reason for this is a historic mistake. In Zeek up to versions 1.5,
analyzers were unconditianally removed when they raised the first
protocol violation.
When this script was ported to the new layout for Zeek 2.0 in
b4b990cfb5, a logic error was introduced
that caused analyzers to no longer be disabled if they were not
confirmed.
This was the state for ~8 years, till the DPD::max_violations options
was added, which instates the current approach of disabling unconfirmed
analyzers after 5 violations. Sadly, there is not much discussion about
this change - from my hazy memory, I think this was discovered during
performance tests and the new behavior was added without checking into
the history of previous changes.
This commit reinstates the originally intended behavior of DPD. When an
analyzer that has not been confirmed raises a protocol violation, it is
immediately removed from the connection. This also makes a lot of sense
- this allows the analyzer to be in a "tasting" phase at the beginning
of the connection, and to error out quickly once it realizes that it was
attached to a connection not containing the desired protocol.
This change also removes the DPD::max_violations option, as it no longer
serves any purpose after this change. (In practice, the option remains
with an &deprecated warning, but it is no longer used for anything).
There are relatively minimal test-baseline changes due to this; they are
mostly triggered by the removal of the data structure and by less
analyzer errors being thrown, as unconfirmed analyzers are disabled
after the first error.
This switches the DPD logic to always log analyzers that raised a
protocol confirmation.
The logic is that, once a protocol has been confirmed - and thus there
probably is log output - it does not make sense to later remove it from
the log. It does make sense to somehow flag it as failed - but that
seems like a secondary step.
This fixes instances where `zeek:see` was used incorrectly so it was not
rendered correctly. All these instances have been found by looking for
`zeek:see` in the generated HTML where it should not be visible anymore.
I also removed a doc reference to `paraglob_add` which never existed.
This caused confusion and I don't think it's very intuitive. If called
with a name that does not exist, this returns without a value, not even
an error value. Changing that seems like it could be more deprecation
work.
* origin/topic/awelzel/move-broker-to-cluster-publish:
netcontrol: Move to Cluster::publish()
openflow: Move to Cluster::publish()
netcontrol/catch-and-release: Move to Cluster::publish()
config: Move to Cluster::publish()
ssl/validate-certs: Move to Cluster::publish()
irc: Move to Cluster::publish()
ftp: Move to Cluster::publish()
dhcp: Move to cluster publish
notice: Move to Cluster::publish()
intel: Move to Cluster::publish()
sumstats: Move to Cluster::publish()
* origin/topic/awelzel/fix-cluster-publish-any:
cluster/Backend: Handle unspecified table/set
cluster: Fix Cluster::publish() of Broker::Data
cluster: Be noisy when attempting to connect to an unknown node
Mostly due to spending too much time wondering why nodes didn't connect
when there was a mismatch between "manager" and "manager-1" in the
cluster layout. Remove manager from test-all-policy-cluster test to
avoid connection attempts in this test.
* topic/christian/disconnect-slow-peers:
Bump cluster testsuite to pull in Broker backpressure tests
Expand documentation of Broker events.
Add sleep() BiF.
Add backpressure disconnect notification to cluster.log and via telemetry
Remove unneeded @loads from base/misc/version.zeek
Add Cluster::nodeid_to_node() helper function
Support re-peering with Broker peers that fall behind
Add Zeek-level configurability of Broker slow-peer disconnects
Bump Broker to pull in disconnect feature and infinite-loop fix
No need to namespace Cluster:: functions in their own namespace
This adds a Broker-specific script to the cluster framework, loaded only when
Zeek is running in cluster mode. It adds logging in cluster.log as well as
telemetry via a metrics counter for Broker-observed backpressure disconnects.
The new zeek_broker_backpressure_disconnects counter, labeled by the neighboring
peer that the reporting node has determined to be unresponsive, counts the
number of unpeerings for this reason.
Here the node "worker" has observed node "proxy" falling behind once:
# HELP zeek_broker_backpressure_disconnects_total Number of Broker peering drops due to a neighbor falling too far behind in message I/O
# TYPE zeek_broker_backpressure_disconnects_total counter
zeek_broker_backpressure_disconnects_total{endpoint="worker",peer="proxy"} 1
Includes small btest baseline update to reflect @load of a new script.
This adds re-peering at the Broker level for peers that Broker decided to
unpeer. We keep this at the Broker level since this behavior is specific to
it (as opposed to other cluster backends).
Includes baseline updates for btests that pick up on the new script's @load.
* origin/topic/johanna/sqlite-pragmas:
Options for SQLite log writer, eliminate duplicate definitions
Test synchronous/journal mode options for SQLite log writer
Added default options for synchronous and journal mode
Support for synchronous and journal_mode
* origin/topic/awelzel/pluggable-cluster-backends-part1:
btest: Test Broker::make_event() together with Cluster::publish_hrw()
btest: Add cluster dir, minimal test for enum value
broker: Add shim plugin adding a backend component
zeek-setup: Instantiate backend::manager
cluster: Add to src/CMakeLists.txt
cluster: Add Components and ComponentManager for new components
cluster/Backend: Interface for cluster backends
cluster/Serializer: Interface for event and log serializers
logging: Introduce logging/Types.h
SerialTypes/Field: Allow default construction and add move constructor
DebugLogger: Add cluster debugging stream
plugin: Add component enums for pluggable cluster backends
broker: Pass frame to MakeEvent()
@Sheco reported that standalone epoch processing may exclude scheduled
events when the final sumstat epoch runs before. For example, this easily
happens when attempting to do sumstat observations within connection_state_remove().
Delay final epoch processing to zeek_done() instead.
This doesn't deal with the clustered version - this would need something
more elaborate and potentially a mechanism to delay the shutdown of
other cluster nodes until/after sumstat processing completed.
* topic/christian/telemetry-make-bifs-primary:
Telemetry framework: move BIFs to the primary-bif stage
Minor comment tweaks for init-frameworks-and-bifs.zeek
This stops invoking Telemetry::sync() via a scheduled event and instead
only invokes it on-demand. This makes metric collection network time
independent and lazier, too.
With Prometheus scrape requests being processed on Zeek's main thread
now, we can safely invoke the script layer Telemetry::sync() hook.
Closes#3947
This moves the Telemetry framework's BIF-defined functionalit from the
secondary-BIFs stage to the primary one. That is, this functionality is now
available from the end of init-bare.zeek, not only after the end of
init-frameworks-and-bifs.zeek.
This allows us to use script-layer telemetry in our Zeek's own code that get
pulled in during init-frameworks-and-bifs.
This change splits up the BIF features into functions, constants, and types,
because that's the granularity most workable in Func.cc and NetVar. It also now
defines the Telemetry::MetricsType enum once, not redundantly in BIFs and script
layer.
Due to subtle load ordering issues between the telemetry and cluster frameworks
this pushes the redef stage of Telemetry::metrics_port and address into
base/frameworks/telemetry/options.zeek, which is loaded sufficiently late in
init-frameworks-and-bifs.zeek to sidestep those issues. (When not doing this,
the effect is that the redef in telemetry/main.zeek doesn't yet find the
cluster-provided values, and Zeek does not end up listening on these ports.)
The need to add basic Zeek headers in script_opt/ZAM/ZBody.cc as a side-effect
of this is curious, but looks harmless.
Also includes baseline updates for the usual btests and adds a few doc strings.
This avoids the earlier problem of not tracking ports correctly in
scriptland, while still supporting `port` in EVT files and `%port` in
Spicy files.
As it turns out we are already following the same approach for file
analyzers' MIME types, so I'm applying the same pattern: it's one
event per port, without further customization points. That leaves the
patch pretty small after all while fixing the original issue.
