IP addresses are often seen in the HTTP host field; this change checks if the value in the host field is a valid IP address and processes the Intel::seen event to check for an Intel::ADDR indicator.
* origin/topic/jsiwek/file-signatures:
File type detection changes and fix https.log {orig,resp}_fuids fields.
Various minor changes related to file mime type detection.
Refactor common MIME magic matching code.
Replace libmagic w/ Bro signatures for file MIME type identification.
Conflicts:
scripts/base/init-default.bro
testing/btest/Baseline/coverage.bare-load-baseline/canonified_loaded_scripts.log
testing/btest/Baseline/coverage.default-load-baseline/canonified_loaded_scripts.log
BIT-1143 #merged
* origin/topic/bernhard/file-analysis-x509:
x509 version always has to be incremented. Baselines already committed.
Fix x509 certificate Version (the +1 was missing...).
Add policy script to suppress non host-certificate logging in x509.log
Forgot the preamble for the new leak test
(hopefully) last change -> return real opaque vec instead of any_vec
Fix dump-events - it cannot be used with ssl anymore, because openssl does not give the same string results in all versions.
Finishing touches of the x509 file analyzer.
Revert change to only log certificates once per hour.
Change x509 log - now certificates are only logged once per hour.
Fix circular reference problem and a few other small things.
X509 file analyzer nearly done. Verification and most other policy scripts work fine now.
Add verify functionality, including the ability to get the validated chain. This means that it is now possible to get information about the root-certificates that were used to secure a connection.
Second try on the event interface.
Backport crash fix that made it into master with the x509_extension backport from here.
Make x509 certificates an opaque type
rip out x509 code from ssl analyzer. Note that since at the moment the file analyzer does not yet re-populate the info record that means quite a lot of information is simply not available.
parse out extension. One event for general extensions (just returns the openssl-parsed string-value), one event for basicconstraints (is a certificate a CA or not) and one event for subject-alternative-names (only DNS parts).
Very basic file-analyzer for x509 certificates. Mostly ripped from the ssl-analyzer and the topic/bernhard/x509 branch.
BIT-1150 #merged
* origin/topic/bernhard/file-analysis-x509:
Forgot the preamble for the new leak test
(hopefully) last change -> return real opaque vec instead of any_vec
Fix dump-events - it cannot be used with ssl anymore, because openssl does not give the same string results in all versions.
Finishing touches of the x509 file analyzer.
Revert change to only log certificates once per hour.
Change x509 log - now certificates are only logged once per hour.
Fix circular reference problem and a few other small things.
X509 file analyzer nearly done. Verification and most other policy scripts work fine now.
Add verify functionality, including the ability to get the validated chain. This means that it is now possible to get information about the root-certificates that were used to secure a connection.
Second try on the event interface.
Backport crash fix that made it into master with the x509_extension backport from here.
Make x509 certificates an opaque type
rip out x509 code from ssl analyzer. Note that since at the moment the file analyzer does not yet re-populate the info record that means quite a lot of information is simply not available.
parse out extension. One event for general extensions (just returns the openssl-parsed string-value), one event for basicconstraints (is a certificate a CA or not) and one event for subject-alternative-names (only DNS parts).
Very basic file-analyzer for x509 certificates. Mostly ripped from the ssl-analyzer and the topic/bernhard/x509 branch.
The MHR script involves a "when" statement which can be expensive due to
the way it clones frames/vals. In this case, the fa_file record is
expensive to clone, but this change works around that by unrolling only
the necessary fields from it that are needed to populate a Notice::Info
record. A drawback to this is that the full fa_file or connection
records aren't available in the Notice::Info record when evaluating
Notice::policy hooks for MHR hit notices (though they can possibly be
recovered by using e.g. the lookup_connection() builtin_function).
- Formatters have been abstracted similarly to readers and writers now.
- The Ascii writer has a new option for writing out logs as JSON.
- The Ascii writer now has all options availble as per-filter
options as well as global.
- Improve or just remove some file magic signatures ported from libmagic
that were too general and matched incorrectly too often.
- Fix MHR script's use of fa_file$mime_type before checking if it's
initialized. It may be uninitialized if no signatures match.
- The "fa_file" record now contains a "mime_types" field that contains
all magic signatures that matched the file content (where the
"mime_type" field is just a shortcut for the strongest match).
SSL::Info now holds a reference to Files::Info instead of the
fa_files record.
Everything should work now, if everyone thinks that the interface is
ok I will update the test baselines in a bit.
addresses BIT-953, BIT-760
work fine now.
Todo:
* update all baselines
* fix the circular reference to the fa_file structure I introduced :)
Sadly this does not seem to be entirely straightforward.
addresses BIT-953, BIT-760
The previous method of matching queries with replies was still
unreliable in cases where the reply contains no answers. The new code
also takes extra measures to avoid pending state growing too large in
cases where the condition to match a query with a corresponding reply is
never met, but yet DNS messages continue to be exchanged over the same
connection 5-tuple (preventing cleanup of the pending state).
The scope of dns.log is now only standard queries (OPCODE == 0). Other
kinds of queries (e.g. inverse query) were not handled correctly and
could interfere with the state tracking of the default DNS scripts.
Changes:
- Changing semantics of the new_event() meta event: it's raised
only for events that have a handler defined. There are too many
checks in Bro that prevent events wo/ handler from being even
prepared to raise to do that differently.
- Adding test case.
* topic/robin/event-dumper:
New script misc/dump-events.bro, along with core support, that dumps events Bro is raising in an easily readable form.
Prettyfing Describe() for record types.
in an easily readable form.
This is for debugging purposes, obviously.
Example, including only SMTP events:
> bro -r smtp.trace misc/dump-events.bro DumpEvents::include=/smtp/
[...]
1254722768.219663 smtp_reply
[0] c: connection = [id=[orig_h=10.10.1.4, orig_p=1470/tcp, resp_h=74.53.140.153, [...]
[1] is_orig: bool = F
[2] code: count = 220
[3] cmd: string = >
[4] msg: string = xc90.websitewelcome.com ESMTP Exim 4.69 #1 Mon, 05 Oct 2009 01:05:54 -0500
[5] cont_resp: bool = T
1254722768.219663 smtp_reply
[0] c: connection = [id=[orig_h=10.10.1.4, orig_p=1470/tcp, resp_h=74.53.140.153, [...]
[1] is_orig: bool = F
[2] code: count = 220
[3] cmd: string = >
[4] msg: string = We do not authorize the use of this system to transport unsolicited,
[5] cont_resp: bool = T
[...]
Add a "broxygen" domain Sphinx extension w/ directives to allow
on-the-fly documentation to be generated w/ Bro and included in files.
This means all autogenerated reST docs are now done by Bro. The odd
CMake/Python glue scipts which used to generate some portions are now
gone. Bro and the Sphinx extension handle checking for outdated docs
themselves.
Parallel builds of `make doc` target should now work (mostly because
I don't think there's any tasks that can be done in parallel anymore).
Overall, this seems to simplify things and make the Broxygen-generated
portions of the documentation visible/traceable from the main Sphinx
source tree. The one odd thing still is that per-script documentation
is rsync'd in to a shadow copy of the Sphinx source tree within the
build dir. This is less elegant than using the new broxygen extension
to make per-script docs, but rsync is faster and simpler. Simpler as in
less code because it seems like, in the best case, I'd need to write a
custom Sphinx Builder to be able to get that to even work.
* origin/topic/vladg/ssh-log-fix:
Remove resp_size from the log. Refactor when we write out to the log a bit. Geodata now works reliably.
Fix resp_size in ssh.log, require a minimum resp_size for the heuristic. Some work on geodata, but still a WIP.
They just duplicated the text from where the events are originally
declared and also it's not generally useful to Broxygen-style comment
event *handlers* (they're more of an implementation detail of a script,
not a user-facing element).
This cleans up most of the warnings from sphinx (broken :doc: links,
broxygen role misuses, etc.). The remaining ones should be harmless,
but not quick to silence.
I found that the README for each component was a copy from the actual
repo, so I turned those in to symlinks so they don't get out of date.
- Default extraction limit of 100MB now provided via a tuning script
loaded in local.bro so that command-line Bro is unlimited by default.
- Extraction directory is now created on request of file extraction
rather than unconditionally in bro_init().
