- Thanks for help from Rafal Lesniak in nailing down the location
of the bug and supplying test traffic.
- Test traffic with a TLS 1.2 connection.
- Addresses ticket #1020
http.log now has files taken from request and response bodies in
different fields for each, and can now track multiple files per body.
That is, the "extraction_file" field is now "extracted_request_files"
and "extracted_response_files".
Thanks to git this merge was less troublesome that I was afraid it
would be. Not all tests pass yet though (and file hashes have changed
unfortunately).
Conflicts:
cmake
doc/scripts/DocSourcesList.cmake
scripts/base/init-bare.bro
scripts/base/protocols/ftp/main.bro
scripts/base/protocols/irc/dcc-send.bro
scripts/test-all-policy.bro
src/AnalyzerTags.h
src/CMakeLists.txt
src/analyzer/Analyzer.cc
src/analyzer/protocol/file/File.cc
src/analyzer/protocol/file/File.h
src/analyzer/protocol/http/HTTP.cc
src/analyzer/protocol/http/HTTP.h
src/analyzer/protocol/mime/MIME.cc
src/event.bif
src/main.cc
src/util-config.h.in
testing/btest/Baseline/coverage.bare-load-baseline/canonified_loaded_scripts.log
testing/btest/Baseline/coverage.default-load-baseline/canonified_loaded_scripts.log
testing/btest/Baseline/istate.events-ssl/receiver.http.log
testing/btest/Baseline/istate.events-ssl/sender.http.log
testing/btest/Baseline/istate.events/receiver.http.log
testing/btest/Baseline/istate.events/sender.http.log
- Add a timeout flag to file_analysis.log so it's easy to tell what
has had at least one timeout trigger happen.
- Fix ftp-data service tag not being set for reused connections.
- Fix HTTP::Incorrect_File_Type because mime types returned by FAF have
the charset still in them, but the HTTP::mime_types_extensions table
does not and it requires an exact string match. (still ugly)
- Add TRIGGER_NEW_CONN to track files going over multiple connections.
- Add an initial file/mime type guess for non-linear file transfers.
- Fix a case where file/mime type detection would never be attempted
if the start of the file was a content gap.
- Improve mime type tracking of HTTP byte-range/partial-content,
even if the requests are pipelined or over multiple connections.
- I changed the modbus.events test because having the baseline output
be 80+ MB is nuts and it was sensitive to connection record redefs.
The notable difference here is that ftp.log now logs by default
the PORT, PASV, EPRT, EPSV commands as well as a separate line for
ftp-data channels in which file extraction was requested.
This difference isn't a direct result of now doing the file extraction
through the file analysis framework, it's just because I noticed even
the old way of tracking extracted-file name didn't work right and this
was the way I came up with so that a locally extracted file can be
associated with a data channel and then that data channel associated
with a control channel.
Other misc:
- Remove HTTP::MD5 notice.
- Add "last_active" field to FileAnalysis::Info record.
- Replace "conn_uids", "conn_ids" fields in FileAnalysis::Info record
with just a "conns" fields containing full connection records.
- The http-methods unit test is failing now, but I think it will be
fixed once I change the file handle callback mechanism to use events
instead.
Instead of these events being generated for invalid byte count values
(they should always be even, not odd), a protocol_violation is raised.
modbus_read_holding_registers_response
modbus_read_input_registers_response
modbus_write_multiple_registers_request
modbus_read_write_multiple_registers_request
modbus_read_write_multiple_registers_response
modbus_read_fifo_queue_respons
For modbus message types that include variable amount of register values
(uint16[]), setting a &length attribute without an explicit array size
could trigger a parsing assertion since it allows for the "element" data
pointer to travel past the "end of data" (e.g. when &length is odd).
This is changed to now give both an array size and &length to earlier
terminate the parsing of elements before the assert is checked and
so a single out-of-bound check can be done for the entire array
(leaving off &length causes an out-of-bound check for each element).
Added another parameter to modbus events that carry register arrays to
the script-layer which indicates the associated byte count from the
message (allowing for invalid values to be detected):
modbus_read_holding_registers_response
modbus_read_input_registers_response
modbus_write_multiple_registers_request
modbus_read_write_multiple_registers_request
modbus_read_write_multiple_registers_response
modbus_read_fifo_queue_response
- Added a test for binpac exception handling -- the generated code
should use "binpac::Exception" and not "Exception" for exception
handling logic to avoid accidental overshadowing by
the analyzer-specific type "binpac::ModbusTCP::Exception", which
could lead to interesting asserts being triggered in binpac.
- Update baseline for the event coverage test -- seems that more
events get generated with working exception handling in the generated
binpac parser code.
- Coverage baseline was giving wrong number of events covered.
* remotes/origin/topic/seth/modbus-merge:
Small modbus documentation update and tiny refactoring.
Final touches to modbus analyzer for now.
Major revisions to Modbus analyzer support (not quite done yet).
put some make-up on Modbus analyser
Modbus analyser, added support: FC=20,21
Modbus analyzer,added support: FC=1,2,15,24
Modbus analyzer, current support: FC=3,4,5,6,7,16,22,23
Closes#915.
* origin/topic/jsiwek/gridftp:
Add memory leak unit test for GridFTP.
Enable GridFTP detection by default. Track/log SSL client certs.
Add analyzer for GSI mechanism of GSSAPI FTP AUTH method.
Add an example of a GridFTP data channel detection script.
In the *service* field of connection records, GridFTP control channels
are labeled as "gridftp" and data channels as "gridftp-data".
Added *client_subject* and *client_issuer_subject* as &log'd fields to
SSL::Info record. Also added *client_cert* and *client_cert_chain*
fields to track client cert chain.
It relies on the heuristics of GridFTP data channels commonly default to
SSL mutual authentication with a NULL bulk cipher and that they usually
transfer large datasets (default threshold of script is 1 GB). The
script also defaults to skip_further_processing() after detection to try
to save cycles analyzing the large, benign connection.
Also added a script in base/protocols/conn/polling that generalizes the
process of polling a connection for interesting features. The GridFTP
data channel detection script depends on it to monitor bytes
transferred.
* origin/topic/dina/modbus:
put some make-up on Modbus analyser
Modbus analyser, added support: FC=20,21
Modbus analyzer,added support: FC=1,2,15,24
Modbus analyzer, current support: FC=3,4,5,6,7,16,22,23
I cleaned up the code a bit, mainly layout style.
I did not include the *.bro scripts for now, but a test script
../testing/btest/scripts/base/protocols/modbus/events.bro that prints
out the value for each event.
Merged the Modbus traces from the ics repository into a single trace
as input for the test. They currently trigger 20 of the 34 events.
Addresses #870.
- SSL related files and classes renamed to remove the "binpac" term.
- A small fix for DPD scripts to make the DPD log more helpful if
there are multiple continued failures. Also, fixed the SSL
analyzer to make it stop doing repeated violation messages for
some handshake failures.
- Added a $issuer_subject to the SSL log.
- Created a basic test for SSL.
Changed the parser to not treat 1xx response codes as a final answer
to an unanswered request -- a later response is still expected.
The scripting layer will also not finish a request-reply pair when
seeing 1xx's, instead it logs both the 1xx and final response messages
with associated information of the current request as they're seen.
- Log path's are generated in the scripting land
now. The default Log stream ID to path string
mapping works like this:
- Notice::LOG -> "notice"
- Notice::POLICY_LOG -> "notice_policy"
- TestModule::LOG -> "test_module"
- Logging streams updated across all of the shipped
scripts to be more user friendly. Instead of
the logging stream ID HTTP::HTTP, we now have
HTTP::LOG, etc.
- The priorities on some bro_init handlers have
been adjusted to make the process of applying
filters or disabling streams easier for users.
