* origin/topic/christian/mmdb-configurability:
Modernize various C++/Zeek-isms in the MMDB code.
Fix MMDB code to re-open explicitly opened DBs correctly
Add btest to verify behavior of re-opened MMDBs opened directly via BIFs
Simplify MMDB code by moving more lookup functionality into MMDB class
Move MMDB logic out of mmdb.bif and into MMDB.cc/h.
Fix mmdb.temporary-error testcase when MMDBs are installed on system
Adapt MMDB BiF code to new script-layer variables
Update btest baselines to reflect introduction of mmdb.bif
Move MaxMind/GeoIP BiF functionality into separate file
Provide script-level configurability of MaxMind DB placement on disk
Sort toplevel .bif list in CMakeLists
In AWS GLB environments, the max_depth of 2 is easily reached due to packets
being encapsulated with GENEVE and VXLAN [1]. Any additional encapsulation
layer causes Zeek raise a weird and ignore the inner traffic. Bump the default
maximum depth to 4, while not common it's not unusual either to observe
this in the wild.
[1] https://docs.aws.amazon.com/vpc/latest/mirroring/traffic-mirroring-packet-formats.htmlCloses#3439
The mmdb_open_location_db() and mmdb_open_asn_db() BiFs were untested, and Zeek
has a bug that makes any DBs opened that way fall back to looking up DBs via the
existing script-level config mechanism (via mmdb_dir), which is at least
unexpected and might well be unconfigured if somebody uses the direct BiFs.
The test would previously fail in settings where the user has Maxmind DBs
installed in the hardwired system locations, because the fallback logic still
picked those up.
* origin/topic/awelzel/2326-import-quic:
ci/btest: Remove spicy-quic helper, disable Spicy on CentOS 7
btest/core/ppp: Run test in bare mode
btest/quic: Update other tests
testing/quic: Fixups and simplification after Zeek integration
quic: Integrate as default analyzer
quic: Include Copyright lines to the analyzer's source code contributed by Fox-IT
quic: Squashed follow-ups: quic.log, tests, various fixes, performance
quic: Initial implementation
This moves the ports the LDAP analyzers should be triggered on from the
EVT file to the Zeek module. This gives users full control over which
ports the analyzers are registered for while previously they could only
register them for additional ports (there is no Zeek script equivalent
of `Manager::UnregisterAnalyzerForPort`).
The analyzers could still be triggered via DPD, but this is intentional.
To fully disable analyzers users can use e.g.,
```zeek
event zeek_init()
{
Analyzer::disable_analyzer(Analyzer::ANALYZER_LDAP_TCP);
}
```
On Linux with a default ext4 or tmpfs filesystem, the default buffer size for
reading a pcap is chosen as 4k (strace/gdb validated). When reading large pcaps
containing raw data transfers, the syscall overhead for read becomes visible
in profiles. Support configurability of the buffer size and default to 128kb.
When processing a ~830M PCAP (16 UDP connections, each transferring ~50MB) in
bare mode, this change improves runtime from 1.39 sec to 1.29 sec. Increasing
the buffer further didn't provide a noticeable boost.
Using pcaps from https://interop.seemann.io/ as samples for QUIC protocol
data didn't produce a conn.log for the contained data. `tcpdump -r`
and Wireshark do show the contained IP/UDP packets. Teach Zeek how
to handle link type DLT_PPP 0x09 using a new PPP analyzer based on the
PPPSerial analyzer code.
Usual update to files/x509 baseline after adding new analyzer due
to enum values changing.
This is similar to GH-3206. There do not seem to be practical
consequences - but we should still fix it.
This also includes the udp-testcase that was forgotten in GH-3206.
Avoids loosing state on a connection value when a connection is flipped.
Fixes up the NTP baseline as well where this was visible: analyzer_confirmation_info()
was raised for a connection value which was immediately forgotten due to
the subsequent connection flipping.
Closed#3028
For "individually different but deterministic" runs specifying Zeek's
seed as an environment variable eases setups as one can avoid creating
extra seed files for each of the individual processes.
It is an error to specify the new ZEEK_SEED_VALUES variable together
with the existing ZEEK_SEED_FILE and -G. ZEEK_SEED takes precedence over
deterministic mode (-D) like ZEEK_SEED_FILE does today already.
I wasn't able to reproduce this locally, but after looking at
-B main-loop,tm for a bit it dawned that if the manager is sending
ticks too fast, the Broker IO source may consume two ticks in one go
before expiring timers and that would explain the observed baseline
differences.
Solve this by removing the reliance on realtime delays and switch to
a request-reply pattern instead.
Also fix indentation and bogus messages.
Fixes#3013
In #2464 the warning when overriding a packet analyzer mapping was
removed. While a warning seems indeed excessive, some info would still
be nice to have.
Remove the special case of initializing network time if it hasn't
happened yet. The argument about broker.log containing 0.0 timestamps
is more a problem of the log, not something that would justify modifying
network time globally. For broker.log and possibly cluster.log, it might
be more reasonable to use current time, anyway.
I was a bit wary about tables backed by broker stores being populated
with network_time set to 0.0, but there seems to exist logic and assumptions
that this is okay: It should be the same as if one populates a table with
expirations set within zeek_init().
In fact, staring a bit more, *not setting* network time might be more correct
as workers that don't see packets would never set zeek_start_network_time
which is used within the expiration computation.
This tests that timer expiration happens after a call to set_network_time()
upon the next time around the loop. This should be fairly stable, but
suspect major changes in the main loop or around timer expiration may
subtly change behavior things.
This tested that timers continue working even if one calls
suspend_processing() in zeek -r mode. The new behavior is
that timers do not function in that scenario and the test
invalid.
These seem to have been deprecated since 2018, so do it now.
Unfortunately the message didn't contain a version when it'll
be removed, but it's been long enough.
Mostly, treat HTTP0.9 completely separate. Because we're doing raw
delivery of a body directly, fake enough (connection_close=1, and finish
headers manually) so that the MIME infrastructure thinks it is seeing a
body.
This deals better with the body due to accounting for the first line. Also
it avoids the content line analyzer to strip CRLF/LF and the analyzer
then adding CRLF unconditionally by fully bypassing the content line
analyzer.
Concretely, the vlan-mpls test case contains a HTTP response with LF only,
but the previous implementation would use CRLF, accounting for two many bytes.
Same for the http.no-version test which would previously report a body
length of 280 and now is at 323 (which agrees with wireshark).
Further, the mime_type detection for the http-09 test case works because
it's now seeing the full body.
Drawback: We don't extract headers when a server actually replies with
a HTTP/1.1 message, but grrr, something needs to give I guess.
